• Image 1
  • Image 2
  • Image 3
  • Image 4
  • Image 5
  • Image 6

Vehicle Car Motocycle GPS Tracker High Speed Platform Muti-Alarm Voice Monitor GT06

R508.14
  • Color:

888311 in stock

  • Description

    91

    Overview of the characteristics:

    1.GSM 850/900/1800/1900MHZ.

    2.GPS position.

    3.Auto set APN.

    4.200Mah Battery inside, Power-Cut alarm.

    5.Motion detect, save GPRS flow and power.

    6.GEO-fence alarm.

    7.SOS Alarm.

    8.Shock Alarm.

    9.ACC Alarm.

    10.Speed Alarm

    11.Voice Surveillance.

    12.Voltage DC 9-40V.

    13.Enginee Cut off.

     

    90(1)

    Specification: 

    1).GSM:850/900/1800/1900MHZ

    2).GPRS: Class12, TCP/IP

    3).Working Voltage:9-40V DC

    4).Working current:≈22mA (12VDC)

    5).Working current:≈12mA (24VDC)

    6).GPS locating time:Cold start≈38s(Open sky)

           Warm start≈32s

           Hot start≈2s(Open sky)

    7).GPS Precision:10m(2D RM)

    8).Working temperature:-20℃~+70℃

    9).Working humidity:20%~80%RH

    10).Measurement:98(L)×52(W)×16.5(H)mm

    94

    Device status indicators

    1 Connect DC 9-40V power supply,push the switch(switch beside the sim card holder), the red LED will light continuously.

    2 The blue LED light continuously when searching the GPS signals. When GPS position,the blue LED flashing.

    3 The intermediate green LED (GSM signal state)

    GSM signal is normal, green LED flashing. No GSM signal, the green LED light continuously.

    4 If work normal, after 5 minutes, all LED go off.

    All LED will turn off after 5 minutes. When there is a new call, the LED will relight and turn off 5 minutes.

    Installation

     Prepare for installation

    1  Product Check. Open the packing box and check the device’s model and accessories. If the model is wrong or the accessories not complete, please contact the dealer.

    2  Choose SIM card. Please insert a SIM card which support GSM 2G network to the device. Please take dealer’s advice as reference.

    3  SIM card installation. Discharge the cover of the device and uncover the SIM card holder. Then insert the SIM card and cover SIM card holder (as follows).

     

    4  Open the cover, Push the switch. Then Put back the front cover.

    5  Connect the device to the 9-40V power supply.

    6  Install the device in the hidden place of the car;

    The SIM card must be with GPRS function and enough deposit. If your SIM card need input PIN when power on, please cancel it.

     Installation:

    The GPS tracker must be installed under professional personnel.

    Note:

    1) Please install the device in the hidden place as followings:

    2) Avoid being placed with signal radiators like reverse sensor ;

    3) The device has GSM antenna and GPS antenna inside. Please ensure the receiving side of the device is face up and without metal cover.

    Note: The metal cover will lessen the receiving of GPS signals.

     Device wiring requirements:

    1 The device power supply is DC 9-40V. The red line is positive pole while the black line is negative pole.

    2 The negative pole of power supply connects with ground or the metals. Please do not connect with other ground lines.

    3 When finishing the power supply wire connection, please make the plug of power supply to the device.

     

    Manual Download By QR Code:

    GT06

    证书2

     

Follow us on:

Subscribe to our Newsletter
Please wait...