• Image 1
  • Image 2
  • Image 3
  • Image 4
  • Image 5
  • Image 6
  • Image 7

Hybrid Solar Inverter 10200W On-Grid/Off-Grid MPPT 48VDC to 230VAC Can Work No Battery Built-in 160A Solar Charger

R17849.91
  • Color:

  • Output Voltage:

  • Ships From:

5 in stock

Categories:
  • Description

    Soalr Inverter 1600W 6200W 3600W 8200W 10200W MPPT 500VDC PV Input 220VAC 24V 48VDC Pure Sine Wave hybrid inverter With WiFI

    Feature:

    ◆ Pure Sine Wave Solar Hybrid Inverter;
    ◆ Be able to run without battery;
    ◆ One-key restoring to factory default settings;
    ◆ Built-in Lithium battery automatic activation;
    ” ◆ Bulit-in 160A MPPT solar controller(for 10.2KW),
    140A(for 7.2KW);”
    ◆ Max 7500W & 10800W solar input power respectively;
    ◆ Wide PV input voltage range (90-450VDC);
    ◆ Built-in anti-dusk kit for harsh environment.
    ◆ Smart battery charge design to maximize battery lifespan
    ◆ Dual PV Input & AC output;
    ◆ WIFI available for IOS and Android systems.
    ◆Connectable battery type:Lead-acid/Gel/AGM/Lithium Iron Phosphate(LiFePo4)/Lithium battery

    Model

    SCI-EVO-7200

    SCI-EVO-10200

    RATED POWER

    7200W

    10200W

    Maximum PV Input Power

    7500W

    10800W

    GRID-TIED OPERATION

    PV INPUT (DC)

    Nominal DC Voltage/Maximum DC Voltage

    360VDC/500VDC

    Start-up Voltage/Initial Feeding Voltage

    90VDC/120VDC

    MPPT DC Voltage Range

    90-450VDC

    Number of MPPT Trackers/Maximum Input Current

    1/27A

    2/18A

    GRID OUTPUT (AC)

    Nominal AC Output Voltage

    220/230/240VAC

    AC Output Voltage Range

    195.5-253VAC

    Nominal AC Output Current

    31.3A

    44.3A

    Power Factor

    >0.99

    Feed-in Grid Frequency Range

    49-51±1Hz / 59-61±1Hz

    EFFICIENCY

    Maximum Conversion Efficiency (Solar to AC)

    98%

    TWO LOADS OUTPUT POWER

    Full Load

    7200W

    10200W

    Maximum Main Load

    7200W

    10200W

    Maximum Second Load (battery mode)(Only if the battery voltage is below 44V)

    2400W

    3400W

    Main Load Cut Off Voltage

    44VDC

    44VDC

    Main Load Return Voltage

    48VDC

    48VDC

    OFF-GRID OPERATION

    AC Start-up Voltage/Auto Restart Voltage

    120-140VAC/180VAC

    Acceptable AC Input Voltage Range

    90-280VAC or 170-280VAC

    Maximum AC Input Current

    40A

    50A

    Nominal Operating Frequency

    50/60Hz

    Surge Power

    14400W

    20400W

    BATTERY MODE OUTPUT (AC)

    Nominal Output Voltage

    220/230/240VAC

    Output Waveform

    Pure sine wave

    Efficiency (DC to AC)

    94%

    BATTERY & CHARGER

    Nominal DC Voltage

    48VDC

    48VDC

    Maximum Charging Current(Solar to AC)

    140A

    160A

    Maximum AC Charging Current

    120A

    160A

    GENERAL

    Dimension, D x W x H (mm)

    500*390*130mm

    530*390*130mm

    Net Weight (kgs)

    13.1kg

    14.5kg

    Communication interface

    WIFI

    Humidity

    5% to 95% Relative Humidity (Non-condensing)

    Operating Temperature

    –10°C – 50°C

    Storage Temperature

    –15°C – 60°C

     
     

    FAQ:

    Q:Whether to start with battery?

    A:No

    Q:Whether it can directly supply power to the load?

    A:YES

    Q:Whether it can be connected to the grid?

    A:PV gives priority to power supply to the load, and extra to charge the battery, and more can be integrated into the grid (need to be based on local government policies)

    Q: How many solar panels need to be connected?

    A: In order to start the inverter normally, the voltage of the solar panel is recommended to be 300V-400V, The maximum does not exceed 500V. For PRO-3.6KW/PLUS-6.2KW, and the power of the solar panel is not more than 6.2KW/6.5KW. For example, 10 pcs of 250W 30V solar panels are connected in series.

    Q: Can inverters be connected in series or parallel?

    A: NO.

    Q: Is this a on grid-tied inverter? Can it be output to utility?

    A: YES. It is a hybrid inverter that can be both off-grid and on-grid connected

    Q: Does the inverter have to be connected to the battery?

    A: Can be connected with or without battery, but without the battery, the voltage of the solar panel should exceed 360Vdc.

    Q: What types of batteries can be used?

    A: Lead-acid batteries, gel batteries,Lithium Iron Phosphate(LiFePo4) and lithium batteries can be used. 24V battery for 3.6KW, 48V battery for 6.2KW. The battery cannot be less than 100AH.

    Q: Can it be used in air conditioners, water pumps, and wind turbines?

    A: It can be used in air conditioners, but not in water pumps and wind turbines.

    Q: Is it a high frequency inverter or a low frequency inverter?

    A: High frequency

    Q: Can the utility be used to power the inverter when there is no sun?

    A: YES.

    Q: How to choose the power of the inverter according to the household appliances?

    A: If household appliances contain inductive load appliances, such as refrigerators, washing machines, air conditioners, etc., the power of the inverter is at least three times the total power of the inductive load appliances, otherwise the appliances may not be able to start.

    Q: Is it possible to use PV, battery, grid supply at the same time?

    A: YES. The default PV priority mode, when the PV input is insufficient, the battery and utility will be used.

    Inverter Use Notice:
    1. The starting power of inductive load electrical appliances shall be at least three times of the rated power of the electrical appliances. If the starting power exceeds the inverter power, the inverter may be damaged. Please select a suitable model before purchasing.
    2. Please connect the circuit correctly according to the instructions, and install switches for each circuit.
    3. Starting sequence: first turn on the battery switch, start the inverter, and turn on the PV, mains and load switches.
    4. Shutdown sequence: turn off the switches of load, PV and mains, turn off the inverter, and finally turn off the battery.
    Please connect the circuit correctly according to the instructions, and install circuit breaker switches for each circuit.

    About Us

    Anern,has been dedicated in bringing clean energy to each country,and help people all around the world to enjoy the facility and convenience brought by clean energy.

    12 years enperience in solar energy and led lighting industry.providing service to over 200 countries and areas globally.having developed over 3,000 solar energy projects worldwide.

    Anern has successfully completed hundreds of mega government projects in the past 12 years

    Anern is headquartered in guangzhou,which is one of the most important Chinese Central Cities.

    In addition to headquarter in Guangzhou,Anern has also set up factories and offices in Shenzhen,Zhongshan and Zhejiang

Follow us on:

Subscribe to our Newsletter
Please wait...