• Image 1
  • Image 2
  • Image 3
  • Image 4
  • Image 5
  • Image 6
  • Image 7
  • Image 8
  • Image 9
  • Image 10

Autel MaxiIM 608 IM608 Car Diagnostic tool All System Key Programming Tool Bi-Directional OBD2 Scanner Auto Diagnosis J2534 Key

From R68599.82
  • Ships From:

  • Color:

900 in stock

Categories:
  • Description

    Autel MaxiIM IM608 Professional Key Programming Tool

    Autel MaxiIM IM608 is a state of the art 10-inch Android-based touchscreen tablet combining the most advanced key programming and immobilizer capabilities with OE-level diagnostics and service functions. Equipped with XP400 key programmer and MaxiFlash JVC_I ECU programmer, IM608 is a comprehensive immobilizer and key programming tool and ideal for auto technicians and locksmiths.

    Languages

    English, Spanish, French, German, Polish, Italian, Japanese, Korean, Dutch, Portuguese,Swedish, Russia

    Update & Warranty

    1 Year Free Update & 12 months for any quality problems

    ADVANCED IMMO & KEY PROGRAMMING

    Smart Mode: for Guided and Automated Key Learning
    Expert Mode: for Advanced Key Learning
    ·Read PIN/CS(All Key Lost)
    ·IMIMO ECU Refresh/Coding
    ·Generate Key
    ·BENZ 3rd Generation IMMO Add Key, All key Lost, Key Learning
    ·Key Learning
    ·BMW FEM/BDC Key Learning and ECU Adaptation
    ·Remote Learning
    ·BMW CAS4/3/2 Key Learning
    ·Backup/Restore IMMO Data
    ·VW/AUDI MQB Key Learning,48 Transponder (96-bit) Add Key. All Key Lost, A6 All Key Lost, and More
    ·IMMO ECU Reset/Adaptation

    XP400 SWITCH & CHIP PROGRAMMER

    ·PC Supported
    ·MCU / EEPROM Chip Read / Write
    ·ECU Read / Write
    ·MC9S12 Encrypted Chip Read / Write
    ·Key Reading / Writing
    ·Mercedes Infrared Key Reading / Writing
    ·Finding the Control Frequency
    ·IC Card Reading / Writing

    All-system Diagnostic

    Simply accessing the diagnostic modes via AutoVin or Control Unit, and you’re able to perform diagnosis over all the systems on the vehicle’s ECU in order to locate fault systems and retrieve DTCs.
    ECU Information -provides the retrieved ECU information in detail.

    Read Codes -displays detailed information of DTC records retrieved from the vehicle control module.

    Erase Codes -erases DTC records and other data from the ECM.
    Live Data -retrieves and displays live data and parameters from the vehicle’s ECU.

    Active Test -provides specific subsystem and component tests.

    ECU Coding

    The Coding function is used to re-flash the vehicle control modules, it allows you to update the computer software on the vehicle to the latest version, as well as to reprogram adaptive data for certain components after making repairs or replacements, providing ways for the issues of Drivability, Fuel Efficiency, Power Loss, Fault Codes, Durability of Mechanical Parts.

    Active Test

    The process of sending and retrieving information from a vehicle control module with a device is known as Actuation test or bi-directional control. The main aim of the actuation test function is to request the control module to perform a specific function including system tests, actuator tests, functional tests, inspection tests, reprogramming or reinitialization, thus saving diagnostic time.

    Eg: You connect a fuel pressure gauge, cycled the key and cranked the engine but you couldn’t figure out anything regarding the fuel pressure. With the actuation test function of this diagnostic tool, you can send a fuel pump command on instruction and see the proper fuel pressure, figuring out if there is a problem with the fuel pump circuit or pump.

    More than 30 Service Functions

    The diagnostic tool is specially designed with the Service section to provide you with quick access to the vehicle systems for various scheduled service and maintenance performances. It provides component adaptation or variant coding functions for custom configurations, and also allows you to reprogram adaptive values for certain components after making repairs.

    Oil Reset Service

    Allows you to perform reset for the Engine Oil Life system, which calculates an optimal oil life change interval depend on the vehicle driving conditions and climate.

    EPB Service

    Helps maintain the electronic braking system safely and effectively, deactivating and activating the brake control system, assisting with brake fluid control, opening and closing brake pads, and setting brakes after disc or pad replacement, etc.

    SAS Service

    Allows you to perform calibration for the Steering Angle Sensor, which permanently stores the current steering wheel position as the straight-ahead position in the steering angle sensor EEPROM.

    DPF Service

    Allows you to carry out numerous functions to the Diesel Particulate Filter system.

    TPMS Service

    Allows you to quickly look up the tire sensor IDs from the vehicle’s ECU, as well as to perform TPMS programming and reset procedures after tire sensors are replaced.

    IMMO Service

    Programs a new anti-theft key, and performs key matching when the ignition switch, the combined instrument panel, ECU, BCM, or the remote control battery is replaced

    BMS Service

    Perform a reset on the vehicle battery for clearing the fault information and re-match the battery;

    ABS Reset

    Perform various bi-directional tests to check the operating conditions of Anti-lock Braking System (ABS), and turn off the warning light;

    Tooth Learning

    To make new crankshaft be used and IMMO (Anti-theft matching) to finish keys coding;

    Injector Coding

    Write the new code to the ECU after replacement of injector, so that the injector works;

    Throttle Matching

    Initialize the throttle actuators to the default state for regulating throttle (or idle engine) operations accurately;

    Transmission Adaption / Headlamp / Suspension / CHG tire size / TEC learn / Cylinder / Trans adaption /Airbag Reset / WIN DR ROOF / Seats / Lang change

    And many more…

    Wide Vehicle Coverage- 10,000+ models

    For Audi: A1, A3, A4, A5, A6, RS4, B6, B7, RS5, RS6, A4 Allroad, A8, S8, Q3, RSQ3, Q5, Q7, R8, TT
    For Seat: Alhambra, Altea, Altea, Cordoba, CupraLeon, Exeo, Ibiza, Leon, Mii, Toledo
    For Skoda: Citigo, Fabia India, Fabia, Kamiq, Karoq, Octavia, Rapid India, Rapid, Roomster, Superb, Yeti
    For VW: Amarok, Arteon, Atlas, Beetle, Bora, BoraGli, Caddy, Crafter, EOS, Fox Africa, Fox EU, Fox, GTI, Gol County, Gol(5U), Gol(5W), Golf PLUS, Golf/Rabbit(1K), Golf6 ESTATE, Jetta, Parati, Passat, Phaeton, Polo, Scirocco, Sharan, Suran, T-Roc, Tiguan, Touareg, Touran, Transporter5/Multivan, up, UP!/cross UP!
    For Fiat: 500, 500L, 500X prox, Albea, Boxer, Daily, Doblo, Doblo New, Ducato, Egea, Fiorino, Freemont, Idea, Grande punto, Jumper, Linea, Marea, Nemo, Ottimo, Palio, Palio RST, Panda, Perla, Promaster, Punto, Sinea, Stilo, Viaggio

    And many more, you can check with our official website for car list.

    Specifications

    ·Operation System: Android 4.4.2,KitKat
    ·Processor: Samsung Exynos hex-core Processor(1.3GHz Quad-core ARM Cortex-A7+1.7GHz Dual-core ARM Cortex-A15)
    ·Memory: 2GB RAM & 64 GB On-board Memory
    ·Display: 10.1-inch LED capacitive touch screen with 1920*1200 resolution; Wi-Fi:(802.11 a/b/g/n/ac); USB 2.0
    ·Connectivity: BT v.2.1+EDR; SD Card (Support up to 32GB); HDMI
    ·Camera(rear): 8.0 Megapixel, AF with Flashlight
    ·Sensors: Gravity Accelerometer, Ambient Light Sensor (ALS)
    ·Audio: Microphone; Dual Speakers
    ·Input/output: 3-Band 3.5mm stereo / standard headset jack
    ·Power and Battery: Charging via 12V AC/DC power supply with the temperature between 0℃ to 45℃
    ·Input Voltage: 12V (9-24V)
    ·Power Consumption: 6.5W
    ·Operating Temp: 0℃ to 50℃ (32 to 122℉)
    ·Storage Temp: -20℃ to 60℃ (-4 to 140℉)
    ·Dimensions(W*H*D): 300mm (11.81″) x 220.0mm (8.66″) x 50.0mm (1.97″)
    ·Weight NW: 1.42kg (3.13lb.)
    ·GW: 8.655kg(19.08lb)
    ·Protocols: ISO9141-2, ISO14230-2, ISO15765-4, K/L-line, Flashing code, SAE-J1850 VPW, SAE-J1850PWN, CAN ISO11898, Highspeed, Middlespeed, Lowspeed and Singlewire CAN, GM, GM UART, UART Echo Byte Protocol, Honda Diag-H Protocol, TP2.0, TP1.6SAE J1939, SAE J1708, Fault-Tolerant CAN

    Autel MaxiIM IM608 Packling List:

    1x Autel MaxiIM IM608 Main Unit
    1x APC101 USB Cable
    1x APA101 Signal Cable
    1x MaxiFlash JVCI
    1x APB101+APD101(EEPROM Adaptor+EEPROM Adapter Shell)
    1x APA103(EEPROM Clamp)
    1x XP400
    1x APB102 MB IR Cable
    1x APA104 ECU Clamp
    1x Main Cable
    1x APB104(MCU_FQFP64)
    1x APA105(MCU Clamp)
    1x USB Cable (2m)
    1x APB105 MCU_FQFP80
    1x APA106(MC9S12 Clamp)
    1x Mini USB Cable
    1x APB106(MCU_FQFP144)
    1x APA107(Connect Cable)
    1x AC/DC 12V Adapter
    1x APB107(MCU_FQFP144)
    1x Quick Reference Guide
    2x Light Fuse 6*30mm
    1x APB108(MCU_FQFP176)
    1x Packing List
    1x Cigarette Lighter
    1x APA002(EEPROM Socket)
    1x Carrying Case 634*170*404mm
    1x AAC001

Follow us on:

Subscribe to our Newsletter
Please wait...