• Image 1
  • Image 2
  • Image 3
  • Image 4
  • Image 5
  • Image 6
  • Image 7
  • Image 8
  • Image 9
  • Image 10
  • Image 11
-15%

kebidu 1Pc RF Transmitter 433 Mhz Remote Controls with Wireless Remote Control Switch DC 12V 1CH relay Receiver Module

R152.34 R179.25
  • Color:

86035 in stock

  • Description

    kebidu 1Pc RF Transmitter 433 Mhz Remote Controls with Wireless Remote Control Switch DC 12V 1CH relay Receiver Module

    Input Voltage: 12 V

    • Receiver sensitivity: > 97 dbm

    • Transmitting distance:> 100 m ( open space)

    • Decoding mode: MCU software decoding

    • Remote storage: 20

    • Support remote type: EV1527 learning code

    • Working mode: Momentary, toggle, latching time delay (5s ,10s ,15s )

    • Output terminal: NO , NC , COM

    • Dimension of PCB:35 x 30 x 18 mm (L,W,H)

    • Remote control battery: 2 x 3 V CR2016 button batteries

    Note: Maximum input power is 12 V

    Remote programming

    -Clearing the code :

    Push the learning button on the receiver 8 times , the codes will be reset.

    After clearing the code, remotes will be need to be recalibrated

    -Momentary mode

    Please contact us for detailed use instructions

    -Learning the code : ( Toggle – Press remote button to turn on, press again to turn off.)

    Press the learning key on the receiver 2 times, Wait for a moment , the LED will be off , it comes into learning state .

    -Push the learning key on the receiver 3 times , the LED (on the Receiver)will blink 3 times.

    When the LED is on, press the button of the remote control(You want to let it learn), Push the remote button A, LED flash for 3 times .

    Push the remote button B, Led flash for 3 times .

    After 3 seconds , the LED indicator will be off , Learning to succeed.

    Package including

    1*Receiver module

    1*Remote Control    (with battery)

Follow us on:

Subscribe to our Newsletter
Please wait...